Airing Down the Easy Way

For the last 20+ years that I've been doing the Jeep thing, one thing that was consistent, was the way I aired down my tires. I always just pulled my valve stem cores, and chased my tires with a pressure gauge. 

It wasn't the most elegant solution, and there was always the risk of firing a core into the bush, but it was fast and it worked. Unfortunately, on my last trip to Bobcaygeon, I spent a little too much time chatting, and ended up having to actually inflate a couple tires, because I aired them down too much. 

So....

While searching for Jeep "stuff" as I'm known to do, I found this tire deflator. It removes the valve core, but keeps it safely tucked in itself. It allows controlled release of air, and a handy pressure gauge to keep tabs on the tire. The kit included the deflator, four valve caps, a valve stem tool, and a handy storage box. 

Since pictures speak a thousand words, videos must speak millions. Here's a quick video showing how it works, and really, how simple it is to use.

Canada Jeep Show

On August 10th, I took part in the annual Canada Jeep Show. Arguably the largest all breeds Jeep show. This year Pavement Still Sucks was one of 436 Jeeps that came together for the show. Besides being all about Jeeps, the show raises money for Sick Kids Hospital here in Toronto.
Being that my son will (most likely) need open heart surgery before his 6th birthday, and that it'll be at Sick Kids, I can be doubly passionate about the event.

While I didn't win any raffle prizes, or the 50/50 draw, my Jeep did manage to win the "Best License Plate" category in the Show and Shine. Not bad for a 20 year old TJ that only really looks good from 10' away.



Not really much more to add, except that $15,000 was raised this year, so massive kudos to all those that help put this together.

Just a few photo, since they'll speak for themselves.

Beautiful CJ-3A

I can dream

The TJ always feels so old at these events. But if you look close, there is a CJ poking it's nose out

Panorama from the top of my Jeep

Jeep Therapy - Trip to Bobcaygeon Ontario

Starting the day off

Something isn't right with us Jeep owners. Case in point, I spent July 21st either on my way to, on, or on my way from a trail. To put it another way, I drove 175km (110 miles) to the trails in Bobcaygeon, MAYBE, 10km (6 mile) on the trails, and another 175km home. It was a long day.
I also learned, that at 41, those kinda days are hard on my body.

Putting some country air back in my tires

I also had some time to think in my travels. My Jeep is the result of experiences gained while younger, and in a YJ. So when I set up myself to build the TJ, I made some very conscious decisions in my build.

With the TJ, I decided to go with as low a lift as possible, so rather than 4", I went 2.5". The YJ had no sway bars, the TJ does, and they don't get disconnected. The front and rear carried over the lockers with 4.88's, and the front Warn hub conversion.

It runs down the road as straight as an arrow, and can hold 110km/h (70mph) while doing so.
On the trail, I point it, and it does it. It claws, crawls, and pulls itself through what I throw at it.
It's a ten foot Jeep (looks good from ten feet away), reliable as an anvil, 20 years old, and only has 95000km (59000 miles) on the odometer.


The story of my therapy session is a simple one. Make plans with a buddy, head up to the trails, get some time in the Jeep in. A day when the only responsibility to to make it in and out of the trail and home safely.

Pavement Ends Sprint Top

I picked up a Pavements Ends Sprint Top (PN: 56840) for an absolute steal from Amazon just before Christmas. The down side, is that it's been sitting in my garage teasing me, making me wait for soft top season. Soft top season finally arrived.

As with any fresh top, it's best to get it out and warmed up before trying to get it installed. I had some time to let it sit, since the Sprint Top requires some parts from the stock top. The key parts required are the front bow, door surrounds, and tailgate bar. 

Removing the front bow wasn't difficult. It required laying out the stock top, removing a few screws, and the rear two bows, before flipping the front bow over to access the retaining screws. The screws didn't put up too much of a fight. 

Once the bow has been removed, it's time to drill out the rivets to install the new arms. The Sprint Top includes new arms that will need to be screwed into place. 

It should be noted, that if you don't have a stock sunrider from Jeep, you're going to have to drill a couple holes in your door surrounds for some brackets. For some reason, unknown to me, the measurements are all in metric. Now, I know you're thinking, "Kev, you're from Canada, that should be normal". Well, it's not. I learned to read a tape measure the right way, and millimetre is not it. To save you some time converting, and to assure you that you really don't need to measure out 23/32", here's the conversion that works:  18.5mm -> 3/4"
9.5mm -> 3/8"
19mm -> 3/4"

Now that all the drilling and re-purposing is over, it's time to mount this top. Start by snapping the pivot arms into the door surround brackets you just installed. Flip the header down, and latch it to your windshield.
There are two straps over the centre rollbar loop, get them started, but not cinched down

Flip the rear of the top over the rear of the rollbar, noting that there is an aluminum bar acting as a rear header that will rest against the rollbar. Pull the rear straps down, and loosely attach them to the inside of the tub.

Now attach the windows, and use them as a guide to centre the top. Mine was sitting too far to the drivers side, and the passenger side window simply didn't zip up properly.
Once the fit is right, tighten down all those straps.
Follow the remaining instructions for installing the windows (similar to stock) and you're set.

The top seals really well, doesn't flap too much in the wind, and the large windows are really awesome. I'm really looking forward to getting some use out of the flip back top, mostly because my Redneck Sunrider was a pain to work with, despite being a near zero cost mod. 

2019 To Do List

Wow, guess I'm a few months late. But let's be serious here, I live in Canada and the nice weather is only just starting. So here we go with the plans for 2019. Let's see just how far I get into this list.

• New Pavement Ends Frameless Sprint top that has been sitting in my garage since December. 
• Fix broken bracket on my tail pipe
• Bracket rusted off over the winter. I "fixed it" with some bailing wire. Now it's time to fix it properly
• Mud Flaps.
• Going to fab something up for the rear to keep Johnny Law from getting too interested in my "Excessive Road Spray"
• Electric Radiator Fan.
• Been sitting in my garage for years now. Maybe I should install it. At least I wired the switch into the cab already.
• New Fan Belt.
• To do when I change the fan 
• Finishing off Nate's Jeep
• Nate's First Drive
• Electrical coming together
• Paint almost complete
• Rear Diff Service.

• Bought some Royal Purple max gear oil to change up the rear to see if it makes a difference on the Detroit unloading. Just gotta do it.
• Transmission Service
• Picking up some Redline MT-90, 'cause I hear it makes the AX-5 smooth as butter.
• Delrin Bushing for my Tire Carrier
• I run a pipe on a bolt tire carrier (homemade) and it could use a bushing in there. Going to try and source some Delrin to use.
• Emergency Rear Axle Retainer.
• Got a thought on something that'll hold my axle together should I snap a shaft in the Dana 35c.
• New Winch Cable
• Again, pretty self explanatory.
• Missing bolt in Winch
• Snapped a bolt that holds the gear housing on. Has been fine for years. One of these days I'll head to Bolts+ and get a replacement.
• Jerrycan and Mount

• One day I'll get around to building a mount for a Jerrycan - Got a Jerry can for Christmas!
• Hi-Lift Mount.
• See above. One day
• Lockable storage
• Now that I have a kid, and need all the seats in, I need to build a new locking storage box for behind the back seat. Has to work with the CJ tailgate on the Jeep.

Nate's Jeep - Update

Previous posts:
Nate's first drive
Update and walk around


So here we are in March. I've been lazy on my writing, and I've been lazy on going outside because it's cold up here in the Great White North.

Nate's Jeep is currently parked, but 95% painted and reassembled. I'm actually quite happy with how it's all turned out, and I'm looking forward to him racing around the backyard in it later this year.

Here's the Jeep after the first coat of paint. All the accessories were being painted in my "paint booth" (aka, large cardboard box)

 Adding some "Bling" to the Jeep. I wanted to go with the military motif, but decided a resto-mod look would be suitable. So a little chrome here and there won't hurt. I know "Chrome won't get you home", but really, who doesn't like a little bling bling on their ride.

Here it is during reassembly. You can see, I went with a little more bling on the mufflers out the side. 

Just a couple of shots of the inside coming together. I had to make a mounting plate for the ignition, as it just wasn't working with being mounted to the plastic. You can see the working voltmeter in behind the steering wheel.

Here's the shot from the rear with the bullet taillights. I really like the retro look of these, and they fit the resto-mod aesthetic perfectly.

Here's the front end lit up. I don't think I could've done a better job on capturing the look of a CJ.

The tires are painted black, but I'm not sure if they'll hold up, so new ones may be in store. My wife isn't sold on the all OD paint job, so I may bling up the front bumper to make it stand out a bit.

So, look forward to an update in a few months with a new video of Nate test driving Pavement Stinks.